ELAN MULTIVITOR - the third step of eyebrow and eyelash lamination

Elan Multivitor is step III of the Elan Supersonics eyebrow and eyelash lamination system. This product can also be used by clients at home for eyebrow and eyelash care after lamination procedures. Elan Multivitor is a patented component MULTIVIT SHUTTLE, which contains soybean and wheat plant components and betaine, keratin and protective polymers ensure effective hair regeneration and their natural pH level.

Elan Multivitor: due to the patented component MULTIVIT SHUTTLE (PF), which has a unique composition of active substances, deeply nourishes and moisturizes the hairs of the eyebrows and eyelashes; betaine enhances hydration and restores the hair's natural pH; gives hair elasticity and shine; helps to capture the shape of the hair, and the hydrolyzed keratin in the composition ensures maximum hair protection against the negative effects of external factors.

The pH of the solution is 4.0-5.5.

USE:

After using Step II, apply Multivitor to your eyebrows or eyelashes. Hold for 5 minutes. After the exposure time, remove the excess product with a cotton pad or cosmetic stick moistened with water. .

RECOMMENDATIONS AFTER THE PROCEDURE:

It is not recommended to perform eyebrow, eyelash dyeing with henna paint, as well as eyebrow lightening procedures. Because hairs can be severely damaged, dry, brittle and unruly, matte due to chemical effects.

! It is highly recommended to avoid saunas, solariums and any mechanical action (sleeping face down on the pillow). It is necessary to reduce the contact of eyebrows and eyelashes with water, and also not to clean eyebrows and eyelashes. 24 hours after the lamination procedure.

! For 48 hours after the eyebrow or eyelash lamination procedure, it is strongly recommended to avoid aggressive cosmetic products and aggressive cosmetic procedures (scrubs, face peelings, alcohol-based lotions, laser procedures).

RECOMMENDED:

Do an allergy test before the procedure.
Quantity Multivitor - 1x10 ml;

FOR PROFESSIONAL USE ONLY!

It is recommended to use together with Serum 1 and Serum 2.

Expiry date: 24 months.
Validity from opening: 6 months

Manufacturer: Ukraine

Ingredients: AQUA, CETEARYL ALCOHOL, ISOPROPYL PALMITATE, GLYCERIN, PARAFFINUM LIQUIDUM, HYDROGENATED POLYISOBUTENE, BETAINE, CETEARETH-20, CETRIMONIUM CHLORIDE, ВНТ, SORBITOL, HAMAMELIS VIRGINIANA (WITCH HAZEL) LEAF EXTRACT, LECITHIN, XANTHAN GUM, PANTHENOL, TOCOPHERYL ACETATE, GLYCERYL LINOLEATE, GLYCERYL LINOLENATE, DIATOMACEOUS EARTH, CAPRYLYL GLYCOL, DISODIUM EDTA, GLYCERYL CAPRYLATE, HYDROLYZED KERATIN, LAURDIMONIUM HYDROXYPROPYL HYDROLYZED WHEAT PROTEIN, HYDROLYZED SOY PROTEIN, PHENOXYETHANOL, ETHYLHEXYLGLYCERIN, PARFUM, CITRIC ACID, CI 28440.

EYEBROW LAMINATION PROCEDURE:

1) Analyze the condition of the client's eyebrow hairs

Follow the instructions below for holding time for compositions:

1st type: eyebrow hairs are thick, shiny, chemical procedures (eyebrow dyeing, lamination or lightening procedures) have not been performed before - retention time of serum 1 is 5-8 min., serum 2 is at least 6-8 min.;
2nd type: eyebrow hairs are of medium thickness, natural, healthy or have previously undergone lamination, coloring, lightening. – retention time for serum 1 3-5 min., for serum 2 6-8 min.;
The holding time of Multivitor is 5 minutes for all hair types.
NOTE! The maximum processing time for Serum 1 and Serum 2 is 15 minutes.

NOTE! The work of Serum 1 and Serum 2 directly depends on the air temperature in the room. The higher the temperature, the shorter the reaction time.

2) Prepare the eyebrows for the lamination procedure

To prepare hair and skin, use "ÉLAN professional line Cleansing detox-mousse" special foam for eyebrows and eyelashes with antibacterial effect». Wash the eyebrow area with disposable combs in a circular motion, then remove the foam with a wet cotton pad.

3) Create the shape of the eyebrows (STEP I)

NOTE! Use ТМ ÉLAN professional line argan oil cream to protect the skin from the alkaline step of Izoh. Apply a thin layer to the eyebrows and a thicker layer to the skin around the eyebrows.

Apply 1 serum to the eyebrows. Use a flat makeup brush or micro brush for application.
NOTE! The maximum exposure time must not exceed the exposure time of the selected eyebrow hair type.

At the end of the exposure time, remove the excess solution with a cotton pad moistened with water.
NOTE! When creating the shape of the eyebrows, it is important to take into account the direction of the growth of the eyebrow hair. Changes in the shape of the eyebrows must be smooth so as not to damage the hairs. Maximum change in growth direction 45 degrees.

4) Determine the direction of the eyebrow hair (Serum 2) STEP II

NOTE! If the client has thin and sensitive skin, a thin layer of TM ÉLAN professional line argan oil cream should be applied to the eyebrows and a thicker layer to the skin around the eyebrows.

Apply and spread the serum 2 on the eyebrows, shaping the eyebrow hairs in the right direction.
NOTE! (serum 2) the amount of solution used should be equal to the amount of solution that was used in step I (serum 1).

NOTE! The exposure time of the 2nd serum must be equal to the exposure time of the 1st step (1st serum), but not shorter than 6 minutes.

At the end of the exposure time, wipe off the excess solution with a cotton pad moistened with water, and do eyebrow coloring, if you plan.
At the end of the dye exposure time, remove the dye with a cotton pad moistened with "ÉLAN professional line Cleansing detox foam for eyebrows and eyelashes with antibacterial effect" to stop the chemical reaction. For a better result, use ÉLAN professional line COLOR FIX: color fixing liquid for eyebrows and eyelashes with keratin and sunflower oil. Do this step after you finish your eyebrow tinting procedure as well.

NOTE! It is necessary to take into account that during the dyeing procedure, the color of the eyebrow hairs after lamination may be brighter and the hairs are dyed faster, so carefully choose the color and the time the dye is kept. .

5) Eyebrow hair care (Multivitor)

Apply and distribute Multivitor on the brow hairs.
At the end of the exposure time, wipe off excess product with a cotton pad moistened with water,

NOTE! Eyebrow shaping should be done only after the eyebrow lamination procedure is completed. It is highly recommended to use eyebrow tweezers to avoid serious skin damage.

EYELASH LAMINATION PROCEDURE:

1) Analyze the condition of the client's eyelash hair

Follow the instructions below:

1st type: thick or straight eyelash hairs - 1st serum processing time 6-10 min., 2nd serum at least 6 min.;
2nd type: eyelash hairs are medium thick or thin - treatment time for serum 1 is 3-6 minutes, for serum 2 - at least 6 minutes;
Multivitor treatment time is 5 minutes for all hair types.
NOTE! The maximum processing time for Serum 1 and Serum 2 is 15 minutes.

NOTE! The work of Serum 1 and Serum 2 directly depends on the air temperature in the room. The higher the temperature, the shorter the reaction time.

2) Prepare the eyelashes for the lamination procedure

To clean the hair and skin before the eyelash lamination procedure, use «ÉLAN professional line Cleansing detox-mousse for eyebrows and eyelashes with antibacterial effect». Remove the foam with a cotton pad moistened with water.
Attach a silicone roller of the appropriate size to the upper eyelid. Spread the eyelashes with an applicator and use special glue for lamination to fix them.

3) STEP I (1 serum)

Apply serum 1 on the eyelash curling area. Professional use is recommended